How to remove the feet of  Phenyx Pro’s receiver

How to remove the feet of Phenyx Pro’s receiver

To better fit your wireless microphone system into a rack case for a more professional setup, it is recommended to remove the feed on the bottom of the Phenyx Pro's receiver.
How to solve the noise delay problem of PTX-20/30 Reading How to remove the feet of Phenyx Pro’s receiver 1 minute

STEP ONE

Use a small (micro) screwdriver to pried out the center pin in the bottom of the feet without opening up the unit. After the pin is out the feet slide out easily. Please be careful not to break the plastic pin.

 

 

STEP TWO

Covered the holes with painter's tape to keep dust out.

 

STEP THREE

Fit your receiver into your rack space smoothly.

 

We have also created a tutorial video to walk you through the process. Check it out now! 

    1 out of ...